Paper-plastic composite open-mouth bags are built as one bonded sheet rather than a paper sack slipped inside a woven one. A printed kraft paper layer sits on the outside, a PP woven fabric layer runs through the middle, and an optional PE liner is added on the inside when the product needs more protection. The layers are laminated together, so the bag opens, fills and folds like a paper sack while carrying load like a woven bag.
What each layer does. The kraft paper is the face of the bag, and it is usually the reason a buyer switches to this construction. Flexo print sits sharply on the paper surface — fine type, logos, grade information and handling symbols all read cleanly — and the filled bag has a matte, paper-sack look that stacks tidily on a pallet and presents well in a customer's warehouse. The PP woven core carries the load: it spreads stress away from the corners and stops a small nick from running into a split. The lamination bonds paper to fabric, keeps the plies from separating in heat or rough handling, and slows moisture pickup through the paper face. Where the product is hygroscopic or the transit is long and humid, an inner PE liner adds another barrier inside the woven core.
How it is filled and closed. The top stays open. Operators fill through the open mouth, then close the bag by sewing — with crepe tape over the seam or with a plain stitch. There is no heat-sealing step and no valve, which is what makes the format simple to run where the line is not fully automated.
Where it earns its place. Buyers choose this construction when they want the print quality and shelf presence of a paper bag but cannot accept paper's tear rate on a full industrial fill — fertilizer blenders, chemical powder packers, feed mills, dry-mix plants and masterbatch producers are typical. It also replaces plain PP woven sacks where the weave is too coarse for a detailed label or a brand design. For paper plastic bags for chemicals that are dusty or slightly hygroscopic, the woven core plus the laminated paper face often removes the need for an outer liner sack at the customer's plant.
Load capacity runs from 10 kg to 50 kg, and paper weight, fabric weight and dimensions are all made to order, so a kraft paper pp woven bags supplier can build a bag around a specific fill weight instead of forcing it into a stock size.
| Feature | Benefit |
|---|---|
| Kraft paper + PP woven composite | Paper print surface and woven strength in one bag |
| Open-mouth top | Fast filling by hand, scoop or semi-automatic filler |
| High tensile and puncture resistance | Woven core holds at corners and drop points in transit |
| Moisture-resistant laminate | Protects powders and granules in humid storage |
| Optional PE inner liner | Extra barrier for hygroscopic products |
| Custom flexo printing | Up to 6 colors on the paper face for brand and product detail |
| Sewn closure | Crepe tape or plain stitch for a tight, dust-resistant top |
| Custom width, length and weights | Built to your fill weight and pallet pattern |
| Item | Options |
|---|---|
| Structure | Kraft paper + PP woven fabric (laminated) + optional PE liner |
| Paper weight | Custom design |
| Fabric weight | Custom design |
| Bag width | Custom design |
| Bag length | Custom design |
| Load capacity | 10–50 kg |
| Top | Open mouth |
| Bottom | Sewn |
| Closure | Sewn with crepe tape or plain stitch |
| Printing | Flexo, up to 6 colors, custom design |
| Options | PE liner, anti-slip print, UV stabilization |
Three constructions sit close together in price and are often quoted against each other, so it is worth being precise about where each one stops working.
A pure paper sack wins on feel and on paper recycling streams, and it prints beautifully. It also has the lowest tear resistance at the corners, and once the paper takes on moisture the strength drops further. That is usually fine for light, dry fills handled gently, but it shows up as leakers on a full industrial bag that is palletized, stacked and shipped.
A plain PP woven sack is the strongest and the cheapest per kilo for heavy loads, but the surface is a coarse weave: fine type fills in, photographs poorly, and multi-color brand work has to be simplified. If the bag is only a container and nobody reads it, this is the right answer.
The paper-plastic composite keeps the paper face for print and adds the woven core for strength, with a laminate between them. In practice it is the format that lets a heavy industrial fill carry a full-color brand panel without paper's tear rate — which is why a kraft paper pp woven bags supplier can cover a print brief and a load requirement in a single specification instead of two.
Where the load is light, dry and handled by hand, paper is enough. Where the bag is stacked three high in a humid yard, or the product is a fine powder that finds every pinhole, the composite or a lined composite is the safer choice. Plain woven remains the economical option when print is secondary. If two of them look close in a quotation, the deciding test is usually a short run on your own filling line rather than a datasheet.
A PE inner liner is the option buyers most often leave off the first order and ask to add on the second. The kraft paper and woven layers give the bag its print face, its strength and a degree of moisture resistance; the liner is what stands between a moisture-sensitive fill and the humidity in the air around a stacked pallet.
Add it when the product pulls moisture from the air. Urea and blended fertilizers that cake in the warehouse, salt, sugar, fine chemical powders and any grade with a moisture limit in its own specification are the standard cases. On a long sea freight the risk is not only ambient humidity — condensation forms on the container roof and drips onto the top layer of bags, and the liner keeps that water out of the fill even when the outer paper face is damp.
Add it when the store is humid, open-sided or unheated. A shed with a roof but no walls, a rainy-season dispatch or a floor that sweats all raise the moisture load on the pallet. UV stabilization protects the printed face from light, but it does nothing for the product inside; the liner is the part that does.
Add it when the powder is fine enough to migrate. Fine particles work their way into stitch holes and through the weave over months of handling and vibration. A liner closes that path and keeps the inside of the pallet, and the customer's receiving area, clean.
Skip it when the fill is dry, the transit short and the warehouse closed. Feed, seed and dry minerals moving from a plant to a nearby distributor rarely need more than the laminate. A liner on that run adds cost and an extra step at the sewing head without changing the result.
A liner changes how the bag runs on the line. Air trapped by the liner as the product drops in has to be settled out before the seam is sewn, and the liner skirt is folded back inside the mouth so the sewing head catches paper, weave and liner in one pass. A seam that misses the liner leaves an open path at the top, and that is where most moisture claims begin.
Match the liner to the risk, not to the maximum. A heavier liner film is not automatically better: it still has to take the filling drop without puncturing, fold flat at the seam and let the operator close the bag at production speed. Send the product, its moisture sensitivity, the shipping route and the storage conditions, and we will tell you whether paper plastic bags for chemicals of your grade need a liner at all, and at what film weight.
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
Load capacity runs from 10 kg to 50 kg. Inside that range the bag is built to your fill weight: paper weight, fabric weight and dimensions are all custom, so a 10 kg seed bag and a 50 kg mineral bag share the same construction but not the same material weights. Send the fill weight and the bulk density of the product and we will size it from there.
The laminated structure slows moisture pickup through the paper face, and for hygroscopic products we add a PE inner liner as a further barrier. For paper plastic bags for chemicals that cake easily, the liner is usually worth specifying from the start rather than adding it later. Tell us the storage conditions so the liner and paper weight are chosen for those conditions, not only for the fill.
Yes. Flexo printing runs up to 6 colors directly on the kraft paper face, which is where this bag beats a woven sack — fine type, logos and handling symbols all hold. Send vector artwork and we will confirm the color build against a proof; paper takes ink differently from film, so a proof is the reliable reference rather than a screen.
They are filled through the open top — by hand, with a scoop, or on a semi-automatic open-mouth filler — and closed with a sewing head. This is not an FFS or valve-bag format: there is no valve and no heat-seal step. If your line is fully automated, tell us and we will point you to the format that suits it rather than forcing this one.
Start from bulk density. Most sewn open mouth paper bags 25 kg are built around a width and length that let the product settle into a stable block on the pallet; a dense mineral fills a smaller bag than the same weight of feed or seed. Send the fill weight, the bulk density and your pallet pattern and we will propose the dimensions.
Yes — paper plastic bags for fertilizer are one of the main uses. Fertilizer is often filled warm and stored in humid conditions, so the specification matters: a PE liner for hygroscopic grades, UV stabilization where pallets sit exposed, and an anti-slip print where bags are stacked high. Tell us the grade and where the bags are stored.
Keep them flat, dry and out of direct sun, on a pallet rather than directly against a concrete floor, and use them first in, first out. Paper-faced bags pick up ambient moisture in a damp store, and a damp bag sews and prints less cleanly. UV stabilization helps with short-term exposure on an open dock, but it is not a substitute for covered storage.