As a PE open mouth bags manufacturer, we make heavy-duty polyethylene sacks that are filled through an open top and closed by heat sealing once the product is in. The film behind every bag comes off the same FFS-grade rolls we run on high-speed form-fill-seal lines, so the gauge, tensile strength and sealing behavior are already proven on automatic filling equipment. The difference is that the bag arrives made up — sealed along the bottom, open at the top, ready to fill.
Plants that fill by hand, with a scoop, or on a semi-automatic weigher use this format because nothing on the line has to be re-set between products. Product goes in at the open mouth, the bag is weighed to target, and the top runs through a heat sealer. Buyers who have been running heavy duty plastic bags bought through a general converter usually notice the film first: a steady gauge closes at the same sealer setting every time, and the bottom seam takes the load without thinning out.
The PE wall resists moisture and tearing, which is what decides whether a pallet still looks right after six weeks in a warehouse or a container. Fill weights run from 10 kg to 50 kg, and the same construction covers chemical powders, resin pellets, mineral fillers and agricultural products.
| Item | PE open mouth bags |
|---|---|
| Material | Heavy-duty PE (LDPE / LLDPE blend) |
| Construction | Converted from in-house FFS film rolls |
| Width | 400–760 mm |
| Thickness | 0.07–0.24 mm |
| Load capacity | 10–50 kg |
| Bottom | Heat-sealed |
| Top | Open for filling |
| Printing | Up to 6 colors, custom design |
| Print method | Gravure or flexo |
| Packing | Palletized |
As a PE open mouth bags manufacturer, we find the choice between an open-mouth bag and an FFS pack usually comes down to how the bag is filled. Hand filling, scoop filling and semi-automatic weighers point to an open-mouth bag; a line that repeats one pack continuously at speed supports form-fill-seal film.
Open-mouth wins when batch sizes change often, when you carry a long list of products, or when a line is not busy enough to justify FFS film. Buyers who need polyethylene bags wholesale across a wide product range often run both: open-mouth bags for short runs, trial orders and awkward products, FFS rolls for the volume lines.
One route that works well is to settle the pack in open-mouth form first — fill weight, print and pallet pattern — and then move the volume across to FFS once the pack is approved.
Before filling. Keep empty bags on the pallet or in the carton they arrive in, and stand that pallet on a board, slip sheet or rack rather than directly on a concrete floor — PE film picks up moisture and grit from a damp floor, and a dusty stack is the most common reason a top seal fails later in the shift. Leave the supplied wrap or a clean cover over the stack until the bags reach the filling station, and peel back only the layer being used so the rest stays clean. Store away from extruders, dryers, compressors and windows that catch direct sun: sustained heat and sunlight make polyethylene film tacky and awkward to open squarely at the filling point. Rotate stock oldest-first, and if a pallet has stood open for months, seal-test a few bags from the outside of the stack before you commit a full production run to them.
After filling. Keeping a finished pallet dry is a stacking decision as much as a film decision. Seal the top flat across the full width with a clean, product-free band, and let the seam cool flat before the bag goes onto the pallet. Keep filled heavy duty plastic bags off bare concrete — a pallet board or slip sheet under the load stops the bottom layer wicking ground moisture — and leave a hand's width between the pallet and uninsulated walls or doorways where condensation collects. For warehouse or export storage, wrap or hood the finished pallet so rain, dust and condensation stay off the stack, and crown the top so water runs off instead of pooling on the flat tops of the bags. Dispatch filled pallets oldest-first as well, so a slow-moving line does not hold stock through two humid seasons. If a consignment of fertilizer bags or another hygroscopic powder will sit for a long stretch before it ships, say so at quotation stage and the film grade and gauge can be checked against that storage period.
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
Yes. Tell us whether the product is weighed into the bag on a semi-automatic filler, dropped from a hopper, or scooped by hand, and we set mouth width, gusset and bag length around that equipment rather than around a catalogue size. A drawing goes back to you for approval before production starts.
Every order is made to the dimensions agreed for your product. Custom plastic packaging bags are cut, sealed and printed to a specific width, thickness and bag length, and the approved drawing is what production works from. Nothing is pulled off a shelf and re-bagged.
The film is blown in our own plant to a recorded recipe, and that recipe stays with the bag. Polyethylene bags wholesale runs go through the same extrusion and print set-up as the first order, so gauge and seal behavior match what you qualified. If a resin lot ever forces a change, we raise it before the run, not after.
The load sits on the heat-sealed bottom seam and on the film around it. Heavy duty plastic bags in this range are built for the fill weights it covers, and the thickness you pick should follow the fill weight and how sharp the product corners are. Tell us the pallet pattern and stack height you plan to use and we will advise on thickness before the order is placed.
A heat sealer is the standard closure. Polyethylene packaging bags seal on impulse or constant-heat equipment, and a flat seam across the full width is what keeps the pack dust-tight. If you do not have a sealer yet, tell us the fill rate you run and we will explain what the seam needs.
Yes, this is one of the most common uses. The PE wall is moisture-resistant rather than hermetic, so it slows moisture pick-up in storage and transport but does not behave like a foil laminate. If the product is filled warm or is unusually hygroscopic, say so when you order and the film grade and thickness can be checked against it.
Fertilizer bags and other moisture-sensitive packs get their protection from the film plus how the pallet is handled: sealed tops, pallets kept off concrete, and a hood or wrap over the load. The PE resists moisture and holds its strength in humid air. For storage longer than a normal season, ask about a heavier gauge before the order is fixed.
Keep them on the original pallet or in the carton, off the floor, out of direct sunlight and away from heat sources, and use the oldest stock first. PE film picks up dust and grit easily, so keep the stack covered until the bags reach the filling station.