Packaging Procurement Guide: MOQ & Payment Terms | Jiangmei

Procurement guide

Procurement guide

Ordering, payment, inspection & packing rules — in one place.

The commercial side of buying industrial heavy-duty packaging, written down instead of negotiated by e-mail: how orders are priced and batched, what the payment and lead-time terms are, what documents travel with the goods, how damage is handled, and how the pallets and containers are built.

  • Applies to export orders
  • 4 sections · 22 terms
30 / 70 Deposit & balance, T/T
15–30 Working days, sampling to production
2 Working days to report damage
20–50 FIBC bags per pallet

How to use this page Everything below applies to export orders unless your signed contract says otherwise. Where a figure depends on what you are buying, the rule states how it is calculated rather than quoting a single number — send your size, material and monthly volume and the quotation will carry the exact MOQ, unit price and loading quantity for that item.

Ordering & delivery terms

How quantity is counted, what can be combined on one contract, and when the price is fixed.

Pricing unit by product family

Product family Priced by
Film rolls Kilogram
Bags — valve, open-mouth, FIBC, foil & composite Piece
Stretch hood film Kilogram
Sealing tapes — self-sealing & hot-melt Carton

Standard vs. custom specifications

Standard sizes and custom sizes carry different minimum quantities. The threshold for each product is stated on that product's page, and is confirmed in the quotation for the exact size, ply, thickness and print you ask for.

Combining different specifications

Not in one production run. Custom products require plates and tooling, so each custom specification is ordered and produced separately. Separate orders can be signed under one contract, so you keep a single commercial document while the line runs each specification on its own.

Trial orders

Accepted. Before a volume order, a small trial quantity can be produced so the material, gauge and seal can be tested on your own filling line.

Sampling & mass-production lead time

15 to 30 working days, counted from the point where specification, artwork and sample approval are complete. The span covers sampling through to mass production; the lower end applies to existing structures and standard print positions.

Quotation validity & raw-material adjustment

Prices follow a monthly cycle running from the 26th of the previous month to the 25th of the current month, and are based on the monthly average ex-works raw-material price published by Sublime China Information (SCI, sci99.com). A quotation is therefore tied to the published material price of its own cycle rather than to an open-ended date.

Payment terms & account conditions

Wire transfer as the standard route, with the small-order exception stated up front.

Payment method & deposit

Order type Payment terms
Volume order T/T — 30% deposit with the order, 70% balance before shipment
Sample order 100% prepayment
Small order below USD 10,000 100% prepayment

Letters of credit

L/C is not accepted as a rule. It is open to discussion for large orders only; small orders are settled by T/T as above.

Open account & credit sales

Not offered. Payment terms are not extended on account, and orders are not released against a post-delivery invoice.

Payment conditions by order size

Two tiers apply, and nothing in between: below USD 10,000 — 100% prepayment; from USD 10,000 — 30% deposit on order and 70% before shipment. Trial quantities are priced and paid as sample or small orders until a volume order is placed.

Late payment & breach

Handled under the terms of the signed contract. The contract sets out the remedy, the evidence required and which party bears the associated costs, so both sides work from one document rather than from correspondence.

Inspection, third-party checking & damage claims

What travels with the goods, who inspects, and the two-working-day clock once they land.

Documents supplied with each shipment

Three documents travel with the goods:

  • Certificate of conformity — printed with the manufacturing standard, factory code, specification and date
  • Material certificate
  • Inspection report

Third-party inspection

Inspecting on arrival is recommended, so any issue is found while the container is still open. If a third-party inspection is required, the cost is borne by the buyer and the inspection is scheduled around the production or pre-shipment stage you specify.

Damage & shortage — claim window

Within two working days of arrival, with photos and video as supporting evidence: the outer packaging, the pallet, the container interior and the affected bags or rolls. Reports after the window cannot be tied to a specific shipment.

Responsibility split

Before dispatch

Damage noticed at loading is resolved on the spot, before the truck leaves. Nothing goes onto the vehicle in a condition the driver has flagged.

In transit

Damage found at unloading that was not present at loading is treated as transit damage. The solution is agreed with you — replacement or deduction from the balance at settlement — and the carrier is taken up separately on our side. You deal with one contact, not with the freight company.

After arrival

Damage found in use is assessed case by case. Where only the outer layer is affected, the usual advice is to trim the damaged outer film and continue using the pack; the solution (replacement or deduction) is agreed with you. Responsibility can sit with us, the carrier or the handling on site, and is clarified before anything is settled.

Replacement & compensation

Once responsibility is clarified together and a handling method is agreed, replacement can be arranged. Compensation is settled against the open balance rather than as a separate transaction.

Returns & exchanges

Custom-made products are not returnable — they are produced to your specification and cannot be resold. Where damage came from transport or a similar cause, a replacement shipment is arranged after the responsibility is agreed.

Export packing & container loading

How each family is packed, what pallet you get by default, and what can be changed.

Packing by product family

  • FIBC bulk bags — compressed and baled, 20–50 bags per pallet
  • Film rolls — single roll stretch-wrapped, on a paper core with end caps, palletised
  • Valve bags, open-mouth bags, foil bags, composite bags — packed in cartons

Unit weight follows the actual specification of the item, not a fixed figure.

Pallets, cartons & stacking

Export packing defaults to ISPM 15 heat-treated wooden pallets or fumigation-free pallets, in 1.1 × 1.1 m or 1.2 × 1.0 m. Cartons are five-layer corrugated.

ISPM 15 heat-treated or fumigation-free 1.1 × 1.1 m 1.2 × 1.0 m Five-layer corrugated Fully stretch-wrapped 2–3 layers high

Pallet loads are stretch-wrapped as a whole and stacked 2–3 layers high, within safe and transportable limits.

Containers & loading method

20GP and 40HQ are the usual equipment. Palletised goods such as FIBC bags are loaded by forklift. The exact loading quantity is calculated per product specification and quoted with the offer, because bag size and pallet pattern change the count.

Shipping marks & carton labels

Default marking on every pack: product name, specification, quantity, gross and net weight, batch number, country of origin — MADE IN CHINA — plus handling, stacking and moisture warning marks.

You can supply your own shipping marks; they are printed or labelled to the order instruction.

Custom packaging scope

Print — logo, colour, layout Label content Quantity per bundle / carton Pallet specification Moisture-barrier liner

Where tooling or special packing is involved, the minimum quantity and the cost are confirmed per order before production starts.

Frequently asked

Questions buyers ask about these terms

The five points that come up before a first order is confirmed.

What is the minimum order quantity, and how is an order priced?

Pricing is quoted per product family: film rolls and stretch hood film by kilogram, bags (valve, open-mouth, FIBC, foil and composite) by piece, and sealing tapes by carton. The minimum quantity depends on size, structure and whether printing or tooling is involved, so the exact figure is confirmed per item — standard sizes and custom sizes carry different thresholds. Each product page states the threshold for that product.

Can I run a trial order before placing a volume order?

Yes. A small trial quantity can be produced before a volume order so the material, gauge and seal can be tested on your own filling line. Allow 15 to 30 working days for sampling through to mass production, counted from approval of the specification, artwork and sample.

What are the payment terms?

T/T with a 30% deposit on order and the 70% balance before shipment. Sample orders and small orders below USD 10,000 are 100% prepaid. Credit sales and open account are not offered. L/C is not accepted as a rule, but can be discussed for large orders.

How long is a quotation valid, and how are raw-material price changes handled?

Prices follow a monthly cycle from the 26th of the previous month to the 25th of the current month, based on the monthly average ex-works raw-material price published by Sublime China Information (SCI, sci99.com). A quotation is aligned with the published material price of its own cycle, so the basis of the price is the same one your purchasing team can look up.

What should I do if the goods arrive damaged or short?

Report it within two working days of arrival, with photos and video of the outer packaging, the pallet, the container interior and the affected bags or rolls. Damage is reviewed as having occurred before dispatch, in transit, or after arrival. Once responsibility is clarified and a handling method is agreed, replacement can be arranged or the amount adjusted against the balance. Custom-made products are not returnable, but transit damage is handled by replacement after agreement.

Next step

Send your spec. Get your MOQ, price and loading plan.

Size, material and monthly volume is enough to start. You get back the minimum quantity, the unit price for the current material cycle, the packing pattern and the loading quantity for your container — and a small trial quantity first, if you would rather test it on your own filling line before committing to a volume order.

Trial quantities accepted · Export team replies within 24 hours

Get my MOQ & price
contact us
Name*
Email*
Message*
Verification Code*
Click to verify