A PE valve bag is a heavy-duty polyethylene sack with a small filling valve built into one corner. The empty bag is pushed onto the filling spout, product is blown or gravity-fed in through the valve, and the pressure of the filled bag presses the valve shut behind it.
That one detail changes how a packing hall runs. Bags reach the pallet already closed and dust-tight, so the closing station and the queue in front of it disappear from the end of the line. Fine powder stays inside the bag instead of settling on the floor, the machine frame and the operator, and the shut valve keeps moisture away from the product through warehouse storage and sea freight.
Our valve bags are made from heavy-duty PE film blown in our own plant and converted with the valve set in the position your filler needs. Bag size, film thickness, valve type and print are all made to order, so what arrives is the bag that suits your line rather than one that comes close. We are a PE valve bags supplier to cement plants, mortar producers, fertilizer blenders, mineral processors and compounders, and we build from your product and filling machine details rather than from a standard size list.
| Feature | Benefit |
|---|---|
| Self-closing valve | No stitching or sealing step — faster packing, less labour per pallet |
| Dust-tight filling | A cleaner workshop, less product lost to dust and safer handling for the operator |
| Heavy-duty PE film, made in-house | Stable gauge and high tensile strength, roll after roll |
| Moisture barrier | Protects moisture-sensitive powders in storage and in transit |
| Custom valve types and positions | Matched to your filling machine and spout |
| Custom printing | Brand visibility on every bag that leaves the plant |
| Item | Options |
|---|---|
| Material | Heavy-duty PE (LDPE / LLDPE blend) |
| Bag width | 250–1180 mm |
| Bag length | 180–635 mm |
| Bottom width | 70–220 mm |
| Thickness | 80–200 μm |
| Load capacity | 10–50 kg |
| Valve | Internal valve / External valve |
| Bottom | Square base |
| Printing | Up to 6 colors, custom design |
| Packaging | Palletized |
The two formats solve different problems at the filling station, and the choice usually comes down to how the bag is filled rather than to what goes inside it.
Take valve bags when the product goes in through a spout at line speed and you want the pack closed the moment it leaves the spout. The saving shows up at the end of the line: no closing station, no queue of open bags waiting to be sealed, and far less dust in the room while the bag fills. That is why cement, mortar and a large share of bulk powder packaging for construction and chemicals runs on this format.
Take open-mouth bags when the bag is filled with a scoop, a chute or a semi-automatic filler and then closed by sewing or heat sealing. Open-mouth bags remain the practical choice for short runs, for products that change often, and for hand-filled operations where the extra closing step costs less than setting up a valve filler. Large print areas are also easier to carry on an open-mouth bag, which matters when the bag has to work on a shelf as well as on a pallet.
Why the base decides the stack
A filled bag that slumps into a pillow shape rolls, the pallet pattern drifts, and a load that left the plant square arrives at the customer's yard leaning. The square base is what prevents that. The bottom is folded and sealed into a flat rectangle during conversion, so the bag stands on its own footprint while empty and keeps a flat bottom once the product settles inside. Bags then sit face to face rather than settling into each other, and each layer stays where it was placed.
Footprint before pallet pattern
Base width runs from 70 mm to 220 mm depending on bag size and fill weight, and that single figure sets how many bags fit across a standard 1200 × 1000 mm pallet and how the layers tie together. Send us the pallet size and the pattern you intend to run, and the base width is built to it instead of leaving your warehouse to rework the pattern around a stock base.
Fill weight against base area
A 10 kg bag of light powder and a 50 kg bag of dense mineral do not want the same footprint. A heavier fill lowers the centre of gravity and presses the base flatter — but only if the base is wide enough for that weight. A base too narrow for the load produces a tall, top-heavy bag that tips at the first sharp turn of a forklift. Tell us the target fill weight and bulk density and the base width is set from those, not from the bag length alone.
Stack height and film gauge
Every bag in the stack carries the weight of everything above it, so stack height, storage time and film thickness are chosen together. Within the 80–200 μm range, taller stacks and longer storage justify a heavier gauge; short runs on low pallets can run lighter. Confirm the height you actually intend to build to, because a pattern that is stable at six layers is not automatically stable at twelve.
Wrapping and transit
Filled bags are palletized as standard, and the load is wrapped or hooded before it leaves the plant. Because the valve closes on itself, no open cuff stands proud of the bag to catch on the wrap or snag the layer above. The closed valve also keeps the pallet clean on the outside — no dust trail down the sides of the stack, which matters when the load goes into a customer's warehouse or a container for export. Pallet protection can come from the same plant, including stretch hood film that covers the top and four sides in one cycle.
Before the first run
Send pallet dimensions, the stack height you want to build, target fill weight and how the pallet will be secured. A trial pallet run on your own filler is the quickest way to confirm the pattern, the footprint and the wrap before a full order is placed. For bulk powder packaging that travels by sea, we would rather adjust base width at the sample stage than ship a container of bags that will not stack squarely.
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
Nothing is added. The valve is a short sleeve folded into the bag corner: product flowing in inflates it, and when filling stops and the product settles, the pressure inside presses the sleeve flat and it stays shut. A settled PE valve bag travels without leaking, and the fuller it is packed, the more firmly the valve holds.
Often, yes — where the grades are similar in bulk density and flow, the same bag and valve will handle them. What changes is the fill weight and how the product behaves at the spout, so re-check the target weight and run a few bags before committing a full pallet run. Where densities differ a lot, the bag volume has to change with them.
It follows from the spout and from how filled bags are handled. An internal valve sits inside the bag mouth, so it is protected during stacking and transport; an external valve presents the sleeve on the outside of the bag where a filler needs to reach it. We build custom PE valve bags either way and set the valve to your machine, so the useful answer comes from the spout details rather than from a default choice.
For most mineral, cement and fertilizer grades, heavy-duty PE keeps moisture out through normal storage and transport. Powders that pull moisture quickly may justify a heavier barrier than a single PE wall, and that is worth raising before the specification is fixed. Tell us the product and where it will be stored, and we will confirm what the chemical packaging bags for that grade should be built from.
Yes. The square base gives the filled bag a flat bottom, so it stands on the pallet instead of slumping into a pillow shape. Bags sit squarely on each other, the pallet pattern stays predictable, and the load is easier to wrap and ship — one of the reasons bulk powder packaging on valve bags travels so well.
Up to six colours, printed to your design — brand mark, grade, batch details, handling symbols, whatever the bag has to tell the customer. Every run of custom PE valve bags is printed to an approved proof, so colour and print position are settled before the bags are made.