FIBC bags — also sold as bulk bags, jumbo bags or big bags — are large flexible containers woven from polypropylene. A single bag carries between 500 kg and 2,000 kg of dry, flowable material, so a plant fills one unit instead of counting out dozens of 25 kg sacks and moves the whole load with a forklift or an overhead crane.
The routine is straightforward. The bag is held open on a filling frame or clamped to a filling head, filled to its working load, closed, then stored or loaded for transport. At the receiving end it is lifted over a hopper and emptied. Because the load moves as one unit, labor per tonne falls and the material stays enclosed from filling to discharge instead of being handled sack by sack.
The range covers most industrial bulk work. Woven PP bulk bags 1000 kg are a common middle rating for cement, mineral and resin loads; lighter bags suit seed, granules and smaller batches, and heavier bags handle dense minerals and aggregates. Every rating shares the same basic build — a woven PP body, a top shaped around your filling method, a base shaped around emptying, and four lifting loops.
The material needs to be dry and free-flowing. These bags carry powders, granules, pellets, flakes and small solids: cement and dry mortar, sand and minerals, plastic resin and masterbatch, chemical powders, fertilizer, grain and seed. They are not a liquid package, and wet or hot material should not go in.
Size is made to order, which matters more than it sounds. A filled bag has to sit securely on a standard pallet, pass through a container door, and hang at the right height above your hopper. Give us those three reference points and we build to them.
| Product reference | No.019 |
| Bag type | Woven polypropylene FIBC (bulk bag / jumbo bag) |
| Load range | 500–2,000 kg per bag |
| Body fabric | Woven PP, UV-stabilized grades available |
| Filling options | Open top or filling spout |
| Discharge options | Flat base or discharge spout |
| Inner liner | PE liner available |
| Lifting | Four lifting loops for crane or forklift |
| Dimensions | Custom, made to your required size |
| Printing | Custom printing to your artwork |
| Construction | Reinforced stitching at loop roots, seams and base |
| Format | Filled, stacked and shipped as a single bulk unit |
The filling method decides the top of the bag. On a filling frame the open top is held wide while a chute or hopper drops material in, and the operator checks weight on a platform underneath — the usual arrangement where several products share one line. Where dust control matters, a filling spout is fitted instead, so the bag can be clamped to the filling head and filled with the mouth closed.
Emptying works the same way in reverse. A flat base is emptied by untying or cutting the bag over a hopper, which is clean and quick for free-flowing granules. FIBC bags with discharge spout release the load through a tied outlet underneath, so the operator can open, throttle and re-close the flow without cutting the fabric — the practical choice where a fine powder would otherwise dust heavily and where bags are emptied several times a shift.
Lifting is the step that needs the most discipline. Attach all four loops to the crane hook or forklift jib, lift vertically, and never lift a filled bag by its body or drag it across the floor. Keep people clear of a suspended bag, lower it fully before releasing the loops, and never leave a loaded bag hanging unattended.
Stack filled bags on pallets rather than directly on the floor. Two or three high is normal for dense materials; taller stacks compress the bottom bag and make the stack unstable, and bags should not be dropped from a height onto a stack.
Storage decides how the fabric ages. A dry, covered warehouse is safest, with the bags off the floor, away from sharp edges and clear of standing water. Bags that must live in an open yard are built with UV-stabilized fabric, and the grade follows the exposure period you give us — the same fabric is not right for a two-week turnaround and a six-month wait.
Before a used bag goes back into service, empty it completely, dry it, and check seams, loops and base for abrasion or stitch damage. Whether a bag can make a second trip depends on the material it carried and the condition it came back in, so confirm the reuse basis for your own application with your sales contact.
One last check before the first fill: polypropylene handles a very wide range of dry industrial materials but not every one. If your product is chemically aggressive, solvent-wet or hot, tell us what it is so we can advise before the bags are made.
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
The range runs from 500 kg to 2,000 kg per bag, and the right rating follows the bulk density of your material and the way the filled bag will be lifted and stacked. Woven PP bulk bags 1000 kg are the most common middle rating for cement, minerals and resin, while dense minerals and aggregates move toward the top of the range and seed or small batches sit lower. Give us the material and the target weight and we will confirm fabric weight, loops and dimensions together.
It depends on how you empty them. If bags are cut open over a pit or hopper, a flat base is the simpler choice. FIBC bags with discharge spout make sense when you empty into a mixer or reactor feed, when the powder is fine and dusts badly, or when a plant empties several bags a day. Send the outlet size your receiving point expects and we will match it.
The body is the same woven PP construction, but the details change with the material. Fine chemical powders are more moisture-sensitive and dustier, so they are more likely to need a PE liner and an enclosed filling top, while abrasive minerals put more demand on fabric weight and loop reinforcement. Send the particle size, bulk density and moisture behavior of your product and the build follows from that.
Yes. Branding is printed directly onto the woven fabric, so large logos, bold type and solid color blocks come out cleanly. Fine gradients, very small type and photographs do not reproduce well on a woven surface because they break up across the tape. Send vector artwork and we will check a proof before the run.
That is decided by dimensions, and we make them to your figures. Give us the pallet footprint, the maximum filled height your forklift can handle, the container door height, and the height of the hopper you empty into. If you already have a bag that works well, send its flat measurements and we will match them.
Compare the printed panels with the approved artwork, measure one bag flat against the approved dimensions, and look over the loop roots, seams and base for stitch damage from transit. Do that before the first bag goes onto the filling frame, because a problem is far easier to resolve before the load is inside. If something is not right, contact your sales contact with the batch details and photographs.