Jiangmei PE runner venting film roll is a heavy-duty polyethylene film engineered to do one critical job: let trapped air out. Precision venting — micro-perforations or vent slots — releases air and gas quickly and evenly during high-speed FFS filling, wrapping and storage, preventing ballooning, wrinkling and bursting, while the strong PE base keeps dust and moisture away from your product.
Air is the hidden problem in high-speed powder filling. Every kilogram of product pushed into a bag displaces the same volume of air, and if that air cannot pass through the film it either backs up the fill tube or stays inside the bag — which is how plants end up with ballooned, wrinkled sacks that sit unevenly on the pallet, contaminate the seal area and, at the top of the speed range, split. PE Runner Venting Film Roll is heavy-duty polyethylene roll stock built around that single problem. A controlled pattern of micro-perforations or vent slots runs across the film, so displaced air leaves through the surface of the bag while it fills instead of fighting its way back out of the top. As a venting film for powder filling, its job is simple: let the bag fill dense and settle firm.
Roll stock and hand use. The film is wound on paper cores for FFS and VFFS machines, so it unwinds evenly run after run. Buyers with mixed production also cut it by hand for liner work, for wrapping warm or gas-releasing goods, and for pallet covers where trapped moisture needs a way out. Both formats use the same film and the same vent pattern; only the roll dimensions change, so as an air permeable PE film roll supplier we can keep hand-use and machine rolls on one specification.
Two ways to vent. Micro-perforation puts a dense field of small holes through the film with controlled equipment, and it is the usual route for fine powders that would follow a larger opening straight out of the bag. A slit pattern cuts short vents instead, moving more air per opening; it suits granules, coarse pellets and applications where the film also has to breathe over a long storage period.
What drives the specification. Particle size and bulk density come first — a fine filler and a coarse pellet displace air at very different rates and tolerate very different opening sizes. Filling speed sets how quickly that air has to leave, and the finished bag dimensions set how much vented area is available to do it. Moisture sensitivity pulls the other way: a more open pattern moves air faster but also exchanges more with the air around the pallet, so hygroscopic products usually get a tighter pattern with smaller openings.
Density and layout. Beyond the opening itself, spacing matters. A dense field spread across the full layflat releases air evenly and stops the bag stiffening in one panel; a lighter pattern concentrated where the air pocket actually forms can be enough for a slow fill. Patterns are planned around the finished bag, so vents fall where the product sits and stay clear of the seal and cut-off zones.
Setting it with you. As an air permeable PE film roll supplier, we never quote a vent specification off a catalogue page. Send the product, its bulk density, the fill weight, the bag size and your line speed, and we will propose hole size, density and layout — then confirm it on a trial roll before the pattern is fixed for production.
| Material | Virgin LDPE / LLDPE blend |
| Thickness | 40–200 μm |
| Layflat width | 100–2000 mm |
| Venting | Micro-perforation or slit pattern; hole size, density and layout to your specification |
| Color | Clear, black, milk white or custom |
| Core | 76 mm (3") paper core; roll OD and length to order |
| Roll build | Consistent width, gauge and hardness for stable unwinding |
| Packing | Export-standard cartons or pallets |
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
Yes — hole size, density and layout are tailored to your product and filling line rather than chosen from a fixed menu. Fine powders and coarse granules need different openings, and the pattern also has to fit the bag you run. Share your application details and we will recommend a specification, including whether a PE film with venting slots or a micro-perforated pattern suits you better.
The vents are a small share of the total surface, and the LDPE/LLDPE base film around them still carries the load and resists puncture. Leakage is controlled by the pattern itself: fine powders get smaller openings at closer spacing so air passes but product does not, while coarse granules can take the more open pattern. Tell us the particle size and the pattern is set around it.
That is what the roll is built for. Width is held to the layflat you order, gauge is consistent across the roll, and the roll is finished to unwind without snatching — the things that cause tracking and sealing problems on automatic lines. The paper core fits standard machine shafts, and roll OD and length are made to your machine. Rolls sized for manual use are available as well.
Gauge follows the load and the handling. Heavier fill weights, higher drop heights and rougher pallet handling sit toward the upper end of the range, where tensile strength and puncture resistance have more material behind them; light liners, hand wrapping and short runs sit toward the lower end, where a thinner film is easier to handle and uses less material. Run the first trial at production speed — that settles the question faster than any table.
Yes, that is one of its main uses. Rubber goods and some chemical materials keep giving off vapour after they are packed; with a vented film that vapour passes out through the pattern instead of inflating the pack or stretching the wrap. The same behaviour helps where a product is packed warm and would otherwise trap a pocket of air against the film.
Yes. The same roll goes out for valve-bag conversion, FFS bag making and liner work. For valve bags the pattern has to work with the valve rather than against it: the bag fills through the valve while the film releases the displaced air through the body of the bag, so we set width and vent layout with the valve position and fill weight in mind.