Product Overview
PE Double-Layer Roll Film (No.018) is a matched packaging set rather than a single roll: an inner liner film and an outer roll film, produced together to run through one form-fill-seal cycle. Most buyers arrive needing a roll built to their own former and fill weight, because both plies have to fit the machine and each other.
The inner ply does the quiet work — it holds back moisture, dust and contamination before they reach the product. The outer ply carries the tensile strength, the sealing window and the surface that print sits on. That split is why double layer PE film for FFS bags earns a second reel: each layer is built for the job it actually has to do, instead of one film compromising between barrier and strength.
It suits packers of masterbatch and pigments, chemical powders and fertilizers, and hygroscopic or high-value chemicals — products where a damp bag means caked material, a rejected batch or a complaint three weeks after delivery. Day to day, nothing about the line changes: the roll mounts on the unwind stand, and the film forms, fills and seals as before. What changes is what the bag is still doing to the product a month later.
Inner ply: the barrier
The liner faces the product. It slows moisture vapour and keeps dust and contamination out of the bag interior, which is the ply that decides whether a bag of powder still passes inspection after a month in a warehouse. For anything that cakes, clumps or reacts to humidity, this is where the protection actually sits.
Outer ply: strength and seal
The outer film takes the stress — from the machine, from the filled weight, from the pallet stack above it. It carries the tensile strength, the seal that has to hold under a full bag, and the surface your print sits on. Keeping it separate from the barrier means it can be specified for mechanical performance instead of doing two jobs at once.
Built as a pair
Double layer PE film for FFS bags only works when both plies are dimensioned together, so the two are produced to one specification and supplied as a set, with the liner width and the outer film width set as a matched dimension. The liner is never a near-enough size that has to be trimmed or eased into place on the line.
How the thickness adds up
Per-ply thickness is chosen within our range and the total structure is the sum of the two plies. That is where a heavy duty PE film roll 200 microns figure normally comes from: two plies combined, not one heavy single wall, so the wall thickness is there with the moisture barrier built into it. Tell us the fill weight and how the filled bags are handled, and we will confirm the build that stands up to it.
When one ply is enough
If the product is dry, non-hygroscopic and the bag only has to survive shipping and handling, a single-ply or laminated structure can do the same job with less film. Both are available here, so the structure follows the product rather than the catalogue.
| Material | Virgin LDPE / LLDPE |
| Structure | Inner liner film + outer roll film, supplied as matched sets (single-ply or laminated options available) |
| Thickness | 40–150 µm per ply; total structure to spec, including heavy duty PE film roll 200 microns builds |
| Color | Clear, natural, black or custom |
| Core | 76 mm (3") paper core; roll OD and length to order |
| Packing | Export-standard cartons or pallets |
Jiangmei has been making FFS film and heavy-duty packaging since 1996. The factory runs to 32,000 m² on fully automated lines, with an annual PE capacity of 20,000 MT — enough that film, liner and finished bags come from one supplier rather than three.
That matters more for a two-ply product than for a single roll. Because both plies are extruded and finished in the same plant, gauge and layer ratio hold from the first order to the tenth, and the liner is dimensioned to the outer film at the source instead of being matched afterwards. As a PE tubular film roll supplier we can also take the whole pack in one place: the liner, the outer film, the printed bag and the closure thread.
The practical effect shows up at the second order. Film from an outside converter can drift a few microns between batches; when the same lines make both plies to the same record, the roll you receive in six months behaves like the one you qualified.
Involving our technical team early makes specification easier. Tell us what you are packing, how your line or handling process works and what your machine expects, and we will help you match the right option in our range to your operation, including the settings that suit your conditions. If something does not run as expected, we work through the problem with you, suggest adjustments, and guide setup and first runs. Support continues after delivery, and we are glad to review requirements before you order.
It is a matched two-ply system — an inner liner film plus an outer film, supplied together and produced to a single specification. Single-ply and laminated alternatives are available if a second wall is more protection than your product needs. Share your filling line details and we will recommend the structure rather than leave you to guess.
Yes. Send us the bag or film dimensions you already run — layflat width, length and the thickness you build to — and we produce the liner to match exactly, so it goes into the pack without the filling set-up being touched.
By combining plies rather than extruding one heavy wall. Two plies at the upper end of the per-ply range reach that total, with the moisture barrier already built into the inner layer. Tell us the fill weight and how the filled bags are handled, and we will confirm the build that holds up.
The outer ply. The liner faces the product and stays plain, so the surface in contact with your powder carries no ink. Approve a printed proof against your brand colour before the production run starts.
Yes — the layflat width is set from the former on your machine rather than from a stock list, and a non-standard size is a specification question rather than an obstacle. Send the width you run today or the finished bag dimensions, and we will confirm both the width and the matching outer film before anything is extruded.
In most cases the line runs unchanged, because the two plies are matched in width and arrive together — the set is loaded and threaded as one job rather than two unrelated reels. What does change is the sealing window, which has to be set for the total structure rather than for one ply. Send your machine make, the film you run now and your line speed, and we will tell you what to adjust.